1989-Mitsu-Factory Manual · AC system · страница 33 из 42 · Открыть оригинал PDF ↗
BLOWER RESISTOR
(1) Check for resistance as described below.
| Terminals measured | Standard value n |
|---|---|
| Between terminals @-@ | Approx. 0.5 |
| Between terminals @!-@I | Approx. 1.8 |
| Between terminals @-@ | Approx. 3.3 |
MAGNETIC VALVE

(1) Connect terminal 0 to the positive (+) terminal of the bat-
tery, and connect terminal @ to the negative (-) terminal of
the battery.
(2) The condition of the magnetic valve can be considered
satisfactory if the operation sound (a “click” sound) of the
magnetic valve can be heard when this check is made.

SERVICE POINTS OF INSTALLATION Nz1RDAl.
2. APPLICATION OF COMPRESSOR OIL TO SUCTION
LINE/l. LIQUID LINE
Refer to P. 24-46.










