1989-Mitsu-Factory Manual · mpi system · страница 45 из 48 · Открыть оригинал PDF ↗
MPI SYSTEM - Fuel Tank
14. CONNECTION OF HIGH PRESSURE HOSE TO FUEL PUMP
Temporarily tighten the flare nut by hand, and then tighten
it to the specified torque, being careful that the fuel hose
does not become twisted.
Caution
When tightening flare nut, be careful not to bend or
twist line to prevent damage to fuel pump low connec-
tion.
REPLACEMENT OF FUEL PUMP
NMGFAE
(1) Disconnect the fuel pump connector.
(Refer to P.14-67.)
(2) Remove the fuel tank cap.
(3) Drain the fuel.
(4) Disconnect the fuel high pressure hose and main pipe.
Caution
Cover the hose connection with rags to prevent splash
of fuel that could be caused by some residual pressure
in the fuel pipe line.
(5) Remove the fuel pump installation nuts and then remove
the fuel pump from the- fuel tank.
Оригинальная страница руководства
