1989-Mitsu-Factory Manual · mpi system · страница 47 из 48 · Открыть оригинал PDF ↗
SERVICE POINTS OF REMOVAL
2. DISCONNECTION OF HIGH PRESSURE HOSE TO FUEL
DELIVERY PIPE 3./K hWN PlPE TO HIGH PRESSURE
HOSE
Caution
Cover the high pressure hose connection with rags to
prevent splash of fuel that could be caused by some
residual pressure in the fuel pipe line.
14. REMOVAL OF EYE BOLTS
Hold fuel filter with a wrench and remove eye bolt
retaining fuel high pressure hose with an eye wrench.
Проверка
NIU(UG
* Check the hose and pipes for cracks, bend, deformation
and clogging.
e Check the canister for clogging.
l Check the check valve for malfunction.
l Check the fuel filter for clogging and damage.
NWOMM
SERVICE POINTS OF INSTALLATION 16./8./3. INSTALLATION OF HIGH PRESSURE HOSE
Temporarily tighten the flare nut by hand, and then tighten
it to the specified torque, being careful that the fuel hose
does not become twisted.
9./7. INSTALLATION OF VAPOR HOSV4. RETURN HOSE
When attaching the hose to the pipes, be sure that the
hose is attached until its end comes in touch with the ._
bulge of the pipe as shown in the illustration.
Оригинальная страница руководства
