1989-Mitsu-Factory Manual · mpi system · страница 48 из 48 · Открыть оригинал PDF ↗
2. CONNECTION OF HIGH PRESSURE HOSE
(1) Apply engine oil to the hose union. Then insert the
hose, being careful not to damage the O-ring, and
tighten securely.
Caution
Becasue there is high pressure applied between the
fuel pump and the delivery pipe, be especially sure
that there is no fuel leakage in this area.
(2) Check fuel leakage in the following manner.
0 Apply pattery voltage on to fuel pump driving
terminal which is branched off from control har-
ness on an upper part of firewall to put fuel pump
in motion.
@ Check for fuel leakage in the system, particularly
from connection between fuel high pressure hose
and pipe with fuel line under regular pressure.
Оригинальная страница руководства
