AIR BAGS · 7

AIR BAGS · 7

1991-Montero-Service-Manual · electrical system uniform inspection guidelines · страница 7 из 52 · Открыть оригинал PDF ↗

Attaching hardware not
functioning ............A ... Require repair or replacement
of hardware.
Connector broken ........A .. Require repair or replacement.
Connector (Weatherpack
type) leaking ..........A .. Require repair or replacement.
Connector melted ........A ........... (1) Require repair or
replacement.
Connector missing .......C ............ Require replacement.
Inoperative .............A ........ (2) Require replacement.
Leaking (vacuum) ........A .. Require repair or replacement.
Linkage bent,
affecting performance ..A ... Require repair or replacement
of linkage.
Linkage bent, not
affecting performance ..
2 ... Suggest repair or replacement
of linkage.
Linkage binding,
affecting performance ..
A ... Require repair or replacement
of linkage.
Linkage binding, not
affecting performance ..1 .. Suggest repair or replacement
of linkage.
Linkage broken ..........A ... Require repair or replacement
of linkage.
Linkage loose, affecting
performance ............A ... Require repair or replacement
of linkage.
Linkage loose, not
affecting performance ..1 ... Suggest repair or replacement
of linkage.
Linkage missing .........C ............ Require replacement.
Linkage noisy ...........2 .. Suggest repair or replacement.
Missing .................C ............ Require replacement.
Noisy ...................2 .. Suggest repair or replacement.
Out of adjustment .......A .. Require repair or replacement.
Таблица в оригиналеТаблица: оригинал страницы 7

(1) - Determine cause and correct prior to repair or

replacement of part.

(2) - Inoperative includes intermittent operation or out of
OEM specification.

AIR BAGS

For all air bag components and conditions, refer to vehicle
manufacturer’s specifications for diagnosis and parts replacement.

ALTERNATORS AND GENERATORS

NOTE: If components have been added that increase vehicle
electrical load requirement (for example, sound systems,
air conditioning, alarm systems, etc.), charging system
output must meet the increased demand.

ALTERNATOR AND GENERATOR INSPECTION

Condition Code Procedure

Alternator output meets
OEM specification but is
insufficient for add-on

Оригинальная страница руководства
hardware.
100%

Назад
Сверху