BATTERY HOLD DOWN HARDWARE

1991-Montero-Service-Manual · electrical system uniform inspection guidelines · страница 12 из 52 · Открыть оригинал PDF ↗

missing ................	C .......... Require replacement of
	hardware.
Attaching hardware not
functioning ............	A ... Require repair or replacement
	of hardware.
Connector broken ........	A .. Require repair or replacement.
Connector melted ........	A ........... (1) Require repair or
	replacement.
Connector missing .......	C ............ Require replacement.
Insulation damaged,
conductors exposed .....	A ........... (2) Require repair or
	replacement.
Insulation damaged, conductors not exposed .	1 ............ Suggest replacement.
Open ....................	A .. Require repair or replacement.
Protective shield
(conduit) melted .......	2 ........... (1) Suggest repair or
	replacement.
Protective shield (conduit) missing ......	2 .. Suggest repair or replacement.
Resistance (voltage drop) out of specification ...	A .. Require repair or replacement.
Routed incorrectly ......	B ................. Require repair.
Secured incorrectly .....	B ................. Require repair.
Shorted .................	A .. Require repair or replacement.
Terminal broken .........	A .. Require repair or replacement.
Terminal burned, affecting
performance ............	A ........... (1) Require repair or
	replacement.
Terminal burned, not affecting performance ..	2 .. Suggest repair or replacement.
Terminal corroded,
affecting performance ..	A .. Require repair or replacement.
Terminal corroded, not
affecting performance ..	2 .. Suggest repair or replacement.
Terminal loose, affecting
performance ............	B .. Require repair or replacement.
Terminal loose, not
affecting performance ..	1 .. Suggest repair or replacement.
Voltage drop out of
specification ..........	A .. Require repair or replacement.

Таблица в оригинале

(1) - Determine cause and correct prior to repair or
replacement of part.

(2) - Exposed conductor at replacement (aftermarket) terminal
end does not require repair or replacement.

See BATTERY TRAYS AND HOLD DOWN HARDWARE.

BATTERY TRAYS AND HOLD DOWN HARDWARE

BATTERY TRAY AND HOLD DOWN HARDWARE INSPECTION

Condition Code Procedure

Battery improperly

secured ................ 2 ................. Suggest repair.
Bent, affecting
performance ............ A .. Require repair or replacement.
Bent, not affecting

Оригинальная страница руководства

missing ................ C .......... Require replacement of