Pajero II Workshop Manual 1991 · Наружное оборудование кузова · страница 17 из 53 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

SERVICE POINTS OF INSTALLATION

9.INSTALLATIONOFSIDESILLGARNISH/8.REAR
FLARE/SFRONTFLARE/2.REARDOOR SIDEGAR-
NISH/1. FRONT DOOR SIDE GARNISH

Attachment of double-sided tape to each side gar-
nish (when reusing)

(1) Scrape off the double-sided adhesive tape with a resin
spatula or gasket scraper.

(2) Wipe the body surface clean with a rag moistened with
isopropyl alcohol:

(31Heat the adhesive surface of the double sided tape on
thesideprotectormouldingtoabout4060*C
(104-1409F) .

(4) Attach specified double-sided adhesive tape to each side
garnish:

Adhesive tape: Double-sided tape
7 mm (0.28 in.} wide and

1.2 mm (0.05 in.) thick

Installation of each side garnish

Tear off the double-sided tape backing paper_
NOTE

If you attach part of the adhesive tape to the edge of
the backing paper,it will be easyto tear off

(2)Installtheside garnishso that the clips matchthe
body holes.
NOTE

Ifthe double-sided adhesive tape is difficult to affix during
winter; etc , warm the bonding surfaces of the body and
the side garnishes to about 40-60*C (104-140PF) before
affixing the tape_

(3) Firmly press in thc side garnish:

Оригинальная страница руководства