Pajero II Workshop Manual 1991 · Наружное оборудование кузова · страница 22 из 53 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

SERVICE POINTS OF REMOVAL

14. REMOVAL OF WIPER MOTOR

Loosen thewipermotor assembly mounting bolts,and
then remove thewiper motor assembly_Disconnect the
linkage andthemotor assembly,andthenremovethe
linkage .

Caution

Because the installation angle of the crank arm and
themotor has been set, do not remove them unless
it is necessary todoSO.#ftheymustberemoved,
remove them only after marking their mounting posi-
tions.

INSPECTION WIPER MOTOR

Checkthewipermotor after disconnectingthe wiringhar-
nessconnector,andwiththewipermotor remainingin-
stalled to the body.

OperationofWiperMotoratLowSpeedandHigh Speed

Connectbatteryto the wipermotor as shown inthe
lustration and inspect motor operation at low speed and high
speed,

Operation of Wiper Motor at Stop Position

(1)Run the wiper motor at low speed, disconnect the bat-
tery, and stop the motor.

(2)Reconnect the battery asshownin the illustration,and
confirm that after the motor starts turning at low speed,
it stops at the automatic stop position.

Оригинальная страница руководства