Pajero II Workshop Manual 1991 · Наружное оборудование кузова · страница 35 из 53 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
HEADLAMP WASHER RELAY
(1) Connect battery ad test lamp to the relay as illustrated.
(21 Therelayisnormal if the lamp lights for approximately
0.3 second upon connection of terminalto battery ( )_
CHECK VALVE
Apply pressureto the inlet of the check valve to check its
opening pressure.
Opening pressure:50-110 kPa
(0.5-1.1 kg/cm?, 7.1-15.6 psi)
WASHER FLUID LEVEL SENSOR
(1)Remove the washer fluid level sensor from the washer
tank.
(2) Connectohmmetertotheconnectorofwasher fluid
levcl scnsor
(3)Move the float up and down:
(4)Make sure that when the float is raised, there is no con-
tinuity and when it is lowered,there is continuity_
HEADLAMP WASHER MOTOR
(1) With thewashermotor installed to the washer tank, fill
the washer tank with water,
(2)Connect battery (+) and (~) cables to terminalsand
respectivelytoseethatthewashermotorrunsand
water is injected.
Оригинальная страница руководства
