1989-Mitsu-Factory Manual · Кузов · страница 17 из 104 · Открыть оригинал PDF ↗
OPERATION
Key Reminder Warning
l Battery voltage is always applied through fuse No. 1 to the
key reminder switch.
l If the driver’s door is opened while the key remains in the
ignition switch, the door switch contacts close and current
flows through fuse No. 1, key reminder switch, buzzer,
door switch and ground, causing the buzzer to sound.
Сигнализация непристёгнутого ремня безопасности
l When the ignition switch is at “ON”, battery voltage
through fuse No. 3 is applied to the seat belt warning
timer.
l As a result, current flows through fuse No. 1, key reminder
switch, seat belt warning light, seat belt warning timer and
ground, causing the seat belt warning light to go on for
four to eight seconds.
l If in this time the driver fails to fasten the seat belt, the
seat belt switch contacts close, causing current to flow
through fuse No. 1, key reminder switch, buzzer, seat belt
switch, seat belt warning timer, and ground so that the
buzzer sounds for four to eight seconds.
l Once the driver fastens the seat belt, the seat belt switch
contacts open and the buzzer stops,
TROUBLESHOOTING HINTS
Key Reminder Warning
Key reminder buzzer does not sound
1) Seat belt warning buzzer sounds
l Check door switch.
2) Seat belt warning buzzer also does not sound
0 Check buzzer.
Сигнализация непристёгнутого ремня безопасности
1. Seat belt warning buzzer does not sound
1) Seat belt warning light goes on
l Check seat belt switch.
2) Seat belt warning light does not go on, but key
reminder buzzer is normal
l Check seat belt warning timer.
3) Seat belt warning light does not go on, and key
reminder buzzer does not sound
l Check key reminder switch.
2. Buzzer fails to stop sounding after driver’s seat belt is
fastened
l Check seat belt switch.
3. Seat belt warning light does not go on, but buzzer sounds
l Check bulb.
Оригинальная страница руководства
