1989-Mitsu-Factory Manual · Кузов · страница 43 из 104 · Открыть оригинал PDF ↗
8. INSTALLATION OF DOOR WINDOW GLASS
When the door glass has been removed from the glass
holder, install to the position shown in illustration.
Standard value :
Distance X 466.5-467.5 mm (18.366-18.406 in.)
Distance Y 76.5-77.5 mm (3.012-3.051 in.)
l ADJUSTMENT OF VENTILATOR WINDOW
Refer to P. 23-20.
o ADJUSTMENT OF DOOR WINDOW GLASS
Refer to P. 23-20.
1. INSTALLATION OF DOOR TRIM AND WATERPROOF
FILM
Refer to P. 23-36.
DISASSEMBLY AND REASSEMBLY (Ventilator Window Assembly)
Disassembly steps
I)+ 1. Door window runchannel 162
2. Screw
3. Screw
4. Washer
5. Packing
6. Hinge
7. Pin
8. Ventilator window lock handle
9. Push button
10. Push button spring
11. Wave washer
12. Screw
13. Ventilator open handle
l + Adjustment of ventilator window
14. Ventilator sash spring kit
I)* 15. Ventilator sash
+* 16. Ventilator window glass pad
I)+ 17. Door ventilator window glass
I)+ 18. Ventilator window weatherstrip
w+ 19. Ventilator sash assembly
FyEeverse the disassembly procedures to reassemble.
(2) ,d : Refer to “Service Points of Reassembly”.
Оригинальная страница руководства
