1989-Mitsu-Factory Manual · Кузов · страница 94 из 104 · Открыть оригинал PDF ↗
17. REMOVAL OF QUARTER TRIM
Insert a plastic trim tool between the trim clip (bushing)
and trim clip (pin) and then pry the trim clip to remove.
NOTE
If the trim clip (bushing) and trim clip (pin) come off
together, separate the trim clip assembly from the trim
and install the trim clie (bushing) at the door side. Then
improvise a tool (such as shown in the illustration) to
remove the trim clip (pin).
18. REMOVAL OF REAR SIDE TRIM
(1) Insert a plastic trim tool under the rear side trim and
remove the clips.
(2) Remove the rear side trim.
NOTE
When cutting the clips, be careful not to scratch the
body panel.
22. REMOVAL OF REAR ROOF SIDE TRIM
Using a plastic trim tool, remove the center roof side trim.
Оригинальная страница руководства
