1991-Montero-Service-Manual · trouble shooting · страница 32 из 63 · Открыть оригинал PDF ↗
| Does Not Close | Faulty wiring Neutral safety switch faulty | battery as necessary Check all wiring and connections leading to relay Replace neutral safety switch |
|---|---|---|
| Starter relay faulty | Replace starter relay | |
| Starter Drive Will Not Disenae | Starter motor loose on mountings | Tighten starter attach bolts |
| gg | Worn drive end bushing | See STARTER article |
| Damaged engine flywheel teeth | Replace flywheel and starter pinion gear for damage | |
| Drive yolk return spring broken or missing | Replace return spring | |
| Faulty ignition switch | Replace ignition switch | |
| Insufficient clearance between winding leads to solenoid terminal and main contact in solenoid | Replace starter solenoid | |
| Starter clutch not disengaging | Replace starter clutch | |
| Ignition starter switch contacts sticking | Replace ignition switch | |
| Starter Relay Operates but Solenoid Does Not | Faulty solenoid switch, switch connections or | Check all wiring between relay and solenoid or replace relay or solenoid as necessary |
| Broken lead or loose soldered connections | Repair wire or wire connections as necessary | |
| Solenoid Plunger Vibrates When | Weak battery | Charge or replace battery as necessary |
| Switch is Engaged | Solenoid contacts corroded | Clean contacts or replace solenoid |
| Faulty wiring | Check all wiring leading to solenoid | |
| Broken connections inside switch cover | Repair connections or replace solenoid | |
| Open hold-in wire | Replace solenoid | |
| Low Current Draw | Worn brushes or weak | Replace brushes or brush springs as necessary |

