MANUALS · EXTERIOR [51] · страница 16 из 54 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

SERVICE POINTS ' OF REMOVAL

REMOVAL OF FRONT DOOR SIDE GARNISH/2: REAR
DOORSIDEGARNISH/S.FRONTFLARE/8.REAR
FLARE/9. SIDE SILL GARNISH

(1) Apply masking tape to the outside circumference of
each side garnish

(2) Insertfishing line [00.8 mm (0.03 in)l in between
the body and the side garnish, andpullboth ends al-
ternately to cut the adhesive section and remove the
side garnish

(3) Pullthesectionoftheside garnishwiththe clips
towards you to remove the clips

Caution

When reusingtheside garnish,removeby
pulling the fishing line along the edge of the
bodySoasnotto damagethe edgeofthe
side garnish:

2.If the adhesive is difficult to remove, heat it to
40P€ (104PF).

(4) Scrape off the double-sided adhesive tape with a resin
spatula_

(5)Tearoff the masking tape.

(6) Wipe the body surface clean with a rag moistened with
isopropyl alcohol:

4.17REMOVAL OF BLIND RIVETS
Usedrill [64.0-5.5mm(0.16-0.22in.)]tobreakthe
rivet by drillinghole, and remove the blind rivet:

Mitsubishi Motors CorporationOct:1991

Оригинальная страница руководства