MANUALS · EXTERIOR [51] · страница 30 из 54 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Operation of Rear Wiper at ON Position

(1) Connect theterminal of the voltmeter to terminal
and theterminal to terminal

(2) Check that battery voltage showswhen the battery
terminal is connected to terminal0,and the battery
terminal is connected to terminal

WASHER MOTOR

(1)With the washer motor installed to the washer tank, fill
the washer tank with water

(2)When the battery is connected as shown in the figure,
check that the water squirts out strongly

SERVICE POINT OF INSTALLATION

INSTALLATION OF GROMMET

Install the grommet so that the arrow points downwards_

5INSTALLATIONOFWIPERARMANDBLADEAS- SEMBLY

Install the wiper blade so that the tip stops at the stand-
ard position (standard value) , and also so that the lower
sectionofthewiper bladeentersthemiddleof the
defogger pattern.

Standard value (A):65-75mm (2.56-2.95 in)

Оригинальная страница руководства