MANUALS · EXTERIOR [51] · страница 23 из 54 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Подрулевые переключатели
Wiper and Washer Switch
<Vehicles without SRS>
Disconnect the column switch connector and check the con-
tinuity between the terminals for each switch:


Распознанный текст таблицы — требует сверки с оригиналом
| Connector |
|---|
| Terminal Switch position |
| OFF |
| Wiper switch (LO) |
| 2 (HI) |
| Washer switch ON |
NOTE
L0 indicatesthat thereis continuitybetweentheter-
minals.
<Vehicles with SRS>
(1) Remove the column cover lower
(2) Remove the column cover upper
(3)Loosen the screws indicated by arrows in the illustration,
and then remove the wiper and washer switches_
(4) Operatetheswitchestocheck the continuitybetween
the terminals
(LAdrive vehicles)
Распознанный текст таблицы — требует сверки с оригиналом
| Switch position | Terminal | 10 |
|---|---|---|
| OFF | ||
| Wiper switch | 1 (LO) | |
| 2 (Hi) | ||
| Washer switch | ON |
(R.H: drive vehicles)
Распознанный текст таблицы — требует сверки с оригиналом
| Switch position | Terminal | 10 | 11 | 12 |
|---|---|---|---|---|
| OFF | ||||
| Wiper switch | 1 (LO) | |||
| 2 (HH) | ||||
| Washer switch | ON |
NOTE
indicatesthatthereis continuitybetweentheter-
minals
Intermittent Wiper Relay (Intermittent Operation Inspec-
tion)
(1) Connect the column switch connector.
(2) Turn the ignition switch to ACC.
(3) Inspect the intermittent operation timewhen the wiper
switch is turned to INT.
Vehicles without variable intermittent control
Approx: 3-6 seconds
Vehicles with variable intermittent control
FASTApprox3 seconds
SLOWApprox12 seconds



