MANUALS · EMISSION CONTROL [17] · страница 45 из 46 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

(6) Ifthevoltageisoutsidethestandard value, adjust by
loosening the lever position sensor mounting screw and
turningtheleverpositionsensor.Afteradjustment,
securely tighten the screw

NOTE

If the lever position sensor is turned clockwise, the output
voltage will be increased.

Turn the ignition switch to OFF

(8) Adjust the accelerator cable play:

ENGINE SPEED SENSOR INSPECTION

(1) Disconnect the engine speed sensor connectors.

(2) Measure the resistance between the engine speed sen-
sorterminals

Standard value:1.3-1.9 kQ

ENGINECOOLANTTEMPERATURESENSORINSPEC-
TION

(1) Remove the engine coolant temperature sensor.

(2) Dip the sensing section of the engine coolant tempera-
ture sensor in oil and measure the resistance value
Standard value:

Таблица в оригинале

Распознанный текст таблицы — требует сверки с оригиналом

Temperature (PC (PF)J	Resistance value	(kS)
(32)	8.6
20 (68)	33
40 (104)	1.5
80 (176)	0.3

If the resistance differs largely from the standard value
replace the engine coolant temperature sensor.

Оригинальная страница руководства