2002 · FUEL [13] · страница 49 из 68 · Открыть оригинал PDF ↗
| Termina No. | l Check item | Inspection conditions | (engine status) | Normal condition: |
|---|---|---|---|---|
| 16 | Glow plug relay | D Engine coolant t D Ignition switch: O | emperature: 40_C or lower FF →ON | System voltage (In about 8 seconds: at 20_C) →0 - 1 V |
| 17 | Variable geometry solenoid valve | Engine: After warm- ing up the engine | Engine is idling Engine is suddenly raced | 4.4 - 10.1 V Voltage rises |
| 21 | A/C relay | A/C switch: OFF →O | N | System voltage →0 - 1 V |
| 31 | Idle switch | Ignition switch: ON | Release the foot from the accelerator pedal. | 0 - 1 V |
| Step on the accelerator pedal slightly | 3 V or higher | |||
| 32 | A/C switch | A/C in operation (com | pressor in operation) | System voltage |
| 36 | Selector switch between A/T and M/T | Ignition switch: ON | System voltage (M/T) | |
| 46 | Control relay | Ignition switch: ON | 0 - 1 V | |
| Ignition switch: ON → | OFF (in about 8 seconds) | System voltage | ||
| 51 | Pump speed sensor | Engine: Idling (Use a d | igital voltage meter to check.) | 0 V ↔5 V (repeat the change) |
| 55 | Accelerator pedal position sensor (sub) | Ignition switch: ON | Accelerator pedal: Idling position | 0.9 - 1.1 V |
| Accelerator pedal: Fully opened position | 3.7 V or higher | |||
| 60 | Sensor power supply | Ignition switch: ON | 4.6 - 5.4 V | |
| 71 | Ignition switch-ST | Engine: Cranking | 8 V or higher | |
| 80 | Back-up power supply | Ignition switch: OFF | System voltage | |
| 81 | Power supply to accel- erator pedal position sensor (main) | Ignition switch: ON | 4.6 - 5.4 V | |
| 82 | Ignition switch-IG | Ignition switch: ON | System voltage | |
| 83 | Engine coolant tem- perature sensor | Ignition switch: ON | Engine coolant temperature: 0_C | 3.7 - 4.3 V |
| Engine coolant temperature: 20_C | 2.8 - 3.4 V | |||
| Engine coolant temperature: 40_C | 1.9 - 2.5 V | |||
| Engine coolant temperature: 80_C | 0.6 - 1.2 V | |||
| 84 | Accelerator pedal posi- tion sensor (main) | Ignition switch: ON | Accelerator pedal: Idling position | 0.9 - 1.1 V |
| Accelerator pedal: Fully opened position | 3.7 V or higher | |||
| 85 | Boost pressure sensor | Ignition switch: ON (1 | 01 kPa) | 1.0 - 1.4 V |
| 86 | Vehicle speed sensor | D Ignition switch: O D Move the vehicle | N forward slowly | 0 V ↔8 - 12 V (repeat the change) |

