2002 · FUEL [13] · страница 51 из 68 · Открыть оригинал PDF ↗
5.Afterrepairorreplacement,recheckwiththeohmmeter
toconfirmthattherepairorreplacementhascorrected
theproblem.
Engine-ECU Harness Side Connector Terminal Arrangement
| Terminal No. | Inspection item | Normal condition (Check condition) |
|---|---|---|
| 1 - 15 | GE actuator | 0.64 - 0.72 Ω |
| 2 - Body earth | Fuel cut solenoid valve | 6.8 - 9.2 Ω |
| 3 - 12 | Timing control valve | 10.8 - 11.2 Ω |
| 5 - 12 | EGR control solenoid valve No. 2 | 36 - 44 Ω(at 20_C) |
| 9 - 12 | EGR control solenoid valve No. 1 | 36 - 44 Ω(at 20_C) |
| 13 - Body earth | Engine-ECU earth | Continuity (0 Ω) |
| 26 - Body earth | ||
| 14 - 12 | Throttle solenoid valve | 29 - 35 Ω(at 20_C) |
| 31 - 61 | Idle switch | Continuity (Replace the foot from the accelerator pedal) |
| No continuity (when accelerator pedal is fully depressed) | ||
| 51 - 61 | Pump speed sensor | 1.36 - 1.84 kΩ |
| 73 - 74 | Control sleeve position sensor | 5.6 - 6.2 Ω |
| 73 - 75 | 5.6 - 6.2 Ω | |
| 74 - 75 | 11.2 - 12.4 Ω | |
| 77 - 78 | Timer piston position sensor | 160 - 168 Ω |
| 76 - 77 | 80 - 84 Ω | |
| 76 - 78 | 80 - 84 Ω |
Таблица в оригинале
Оригинальная страница руководства
