Кузовной ремонт — дополнение 1998 года · страница 60 из 60 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
ADJUSTMENTOFOTHER PARTS
FRONT FOG LAMP AIMING
Front foglamp aiming adjustment procedureshave been
established to correspond to the addition of frontfoglamp:
Remove thefog lamp bezel.
Measure the centre of the fog lamps, as shown in the
illustration_
3_Set the distance between the screen and the centre of
thefoglampsas shown in the illustration;
Inflatethe tyresto the specifiedpressuresand there
should be no other load in the vehicles other than driver
or substituted weight of approximately 75 kg placed in
the driver's position.
With the engine running at 2,000 rlmin, aim the fog lamp_
5.
Check if thebeam shiningontothescreen is atthe
standard value
Standard value:
(vertical direction)
100mm below horizontal (H)
(Horizontal direction)
Parallel to direction of vehicle travel
NOTE
The horizontal direction is non-adjustable. If the deviation
of the light beam axis exceeds the standard value, check
to be sure that themounting location or some other point
is not defective_
Caution
When making the aiming adjustment, be sure to mask
those lamps which are notbeing adjusted:
RJsT706012-64
Оригинальная страница руководства
