1984-Montero · body and sheet metal a · страница 24 из 71 · Открыть оригинал PDF ↗
Installation
1. Coat the weatherstrip with recommended adjhesive and
fit it onto the windshield glass.
I
Recommended adhesive . . . . . . . . . . . . . . . . ., !I . .
3M Super Weatherstrip Adhesive 8001 or equivalent
NOTE
Be sure to use new weatherstrip.
2. Insert a pull cord into the weatherstrip groove.
NOTE
Make certain that the cords overlap each other at both ends.
3. Apply soapy water to the entire periphery of the body
, flange.
4. Place the glass in positioA from outside with the cords
placed inside the passenger compartment. 1
5. With the aid of an assistant to push the glass from out-
side, slowly pull one end .of the cord at right angles to
the windshield glass and fit the lips of the weatherstrip
correctly on the windshield flange. ,
NOTE
Pull the cords, working from both sides of the glass toward
the center and tapping the glass.
Caution
Tap the glass repeatedty until it is lightly held against the
body flange surface.
Оригинальная страница руководства
