1984-Montero · body and sheet metal a · страница 33 из 71 · Открыть оригинал PDF ↗
12. For vehicles not equipped with power windows, remove
the regulator assembly mounting bolts.
NOTE
Hold the regulator assembly so that it does not fall when
the bolts are removed.
13. For vehicles equipped with power windows, disconnect
the power window motor connector from the door
harness, and then remove the power window regulator
mounting bolts.
NOTE
Hold the regulator assembly so that it does not fall when
bolts are removed.
14. Remove the regulator assembly through the access hole.
15. Remove the mounting bolts and remove the lower sash
through the access hole. (18873 1, 18W522)
Power Window Motor (vehicles equipped with power
windows only)
Remove the power window motor from the window regu-
lator.
Caution
Because the force of the regulator spring may cause the
regulator arm to jump up when the screws attaching the
motor to the window regulator are removed, remove the
regulator spring before removing the screws.
Оригинальная страница руководства
