1984-Montero · body and sheet metal a · страница 28 из 71 · Открыть оригинал PDF ↗
ADJUSThiENT
Door Adjustment
1. Using wrench, loosen the bolts that fasten the door
hinges to the body. (lSW563)
2. Move the door up and down and back and fortlh so that
the clearance between the door and the body isi uniform
all around.
3. Position the door flush with the fender by increasing or
decreasing the number of shim(s).
Door Striker Adjustment
t
1. Adjust the vertical and lateral positions of the door
striker by moving the striker itself. (S 1864 1)
2. Insert shim(s) as necessary to adjust the longitudinal
position of the striker. (S 186p 1)
Door Glass Adjustment
1. Remove the door trim and the waterproof film from the
door. (Refer to p. 23-30.) f
2. Loosen the screws and/or bolts which secure the venti-
lator window and rear lower sash. 1
3. With the door glass closed completely, move the vent&
lator window, rear lower sash and the sub roller
guide to adjust the door glass position. (18W613)
Оригинальная страница руководства
