1984-Montero · body and sheet metal a · страница 54 из 71 · Открыть оригинал PDF ↗
4. Remove the glove box frame and the glove box. hinges
from the glove box,
INSTALLATION
1. Connect all of the connectors securely.
2. Make sure that the wiring harnesses are not pinched.
3. Adjust the heater control wires. (Refer to G:ROUP 24.)
4. When installing the glove box, first temporarily tighten
the screws, and then, after checking the top 1e:ft and right
clearances between the glove box lid and the instrument
panel with the lid closed, tighten the screwis. (19W525,
19W522)
Оригинальная страница руководства
