1984-Montero · body and sheet metal a · страница 62 из 71 · Открыть оригинал PDF ↗
3. Slowly peel the headlining away, beginning with the cor-
ner of the roof panel. (19WS54) \
Caution
Make sure that the headlining is removed slowly; as the
sponge portion of the headlining is left behind on the roof
panel.
4. Thoroughly remove the drying sealant and sponge left
behind on the roof panel by using a toluol solution, etc.
Caution
Make sure that all remaining sealant and sponge are thorough-
ly removed, as they produce uneven surfacesLwhen the head-
lining is bonded to the roof panel.
INSTALLATION
1. Evenly apply a drying sealant to the roof panel.
2. When installing the rear headlining, connect the ‘dome,
light connector, pass it through the hole in’ lthe lining,
and then bond the lining so that the hole matches the
dome light mounting hole. ( 19W552)
3. Using care to prevent wrinkles and slackness, bond
the headlining and insert the edges securely into the roof
panel flange by using a spatula, etc.
4. Bond the headlining edges as shown. I
Оригинальная страница руководства
