1984-Montero · steering a · страница 2 из 33 · Открыть оригинал PDF ↗
Общие технические характеристики
Steering wheel diameter mm (in.) 403 (15.9)
Steering shaft type / Collapsible type
Gear box
Steering gear type Ball and nut, torsion bar type
Steering gear ratio 16.4
Oil pump
Oil pump type Vane type
Displacement 10.5 cc/rev. (0.64 in.3/rev.)
SERVICE SPECIFICATIONS
Standard values
Steering angle
Inner wheel 33°00’-;o
Outer wheel 29’00’
Steering wheel free play mm (in.) 25 (1.0) or less
Stationary steering effort N (lbs.) 37 (8.2) or less
V belt deflection mm (in.) 9-12 (.35-.47)
Mainshaft starting torque Ncm (m.lbs.) 25-65 (2-6)
Distance between top of balls and 13 (.5)
rack piston surface mm,(in.)
Cross-shaft end’play mm (in.) o-0.05 (O-.002)
Mainshaft total starting torque Ncm (in.lbs.) 50-90 (4-8)
Oil pump pressure kRa (psi)’ ’
7,500-8,200 (1,067-l ,166)
Gauge hose valve closed
Gauge hose valve opened 980 (142) or less
Tie rod ends ball joint center distance mm (in.) 297.5 (11.7)
Idler arm turning torque Ncm (inlbs.) 300-900 (26-78)
Spring scale reading N (lbs.) 25-75 (5.5-16.5)
Repair limits
Steering wheel free play mm (in.) 50 (2.0)
Steering gear backlash mm (in.) 0.5 (.02)
Service limits
Steering shaft runout mm (in.) 0.5 (.02)
Steering shaft length mm (in.) 750 f 5 (29.5 + .2)
Backlash between rack piston ball groove and balls mm (in.) 0.2 (.008)
Free length of flow control spring mm (in.) 36.5 (1.44)
Clearance between oil pump drive shaft and bushing mm (in.) 0.09 (.004)
Ball joint end play mm (in.) 1.5 (.06)
Joint assembly end play mm (in.) 0.2 (.008)
Оригинальная страница руководства
