1984-Montero · steering a · страница 24 из 33 · Открыть оригинал PDF ↗
15. Measure the mainshaft starting torque by using. the
special tools as illustrated. If the measured (main&aft
starting torque does not comply with the standard value,
remove the valve housing lock nut and adjust the-tight-
ening of the top cover.
Mainshaft starting torque . . . . . . . . . . . . . . . . . . . .
25-65 Ncm (2-6 in.lbs.)
16. Install valve housing assembly and cross-shaft assembly
to the gear box housing.
17. Adjust the mainshaft total starting torque and, tighten the
adjusting bolt lock nut. (Refer to p. 19-21.)
Проверка
2. Measure the steering geaFbacklash at the pitman arm top
end with a dial indicator.
Steering gear backlash [Repair limit] . . . . . . . . . . .
0.5 mm CO2 in.)
Оригинальная страница руководства
