1984-Montero · steering a · страница 28 из 33 · Открыть оригинал PDF ↗
COMPONENT SERVICE- POWER STEERING OIL PUMP
9. Remove the oil seal from the oil pump body.
10. Remove the connector from the oil pump body, and take
out the flow control valve and flow control spring.
(13K564)
11. Remove the O-ring from the connector. (Y 1366 1)
Caution
Do not disassemble the flow contol valve.
Проверка
1. Check flow control spring for spring free lengthi.
(13C210)
2. Check flor control valve for clogging.
3. Check pulley assembly for wear or damage.
4. Check V-belt for cracks and deterioration.
5. Check groove of rotor and vane for “stepped” wear.
6. Check contact surface of cam ring and vanes for “step-
ped” wear.
7. Check vanes for damage.
8. Check contact surface of pump body, and pump cover
with rotor for streak-like abrasion.
REASSEMBLY
1. Drive the oil seal into the pump body with the special
tools.
Оригинальная страница руководства
