1984-Montero · steering a · страница 32 из 33 · Открыть оригинал PDF ↗
I.
Idler Arm Assembly
1. Detach the relay rod from the idler arm by using the
special tool. (13W501)
2. Remove the idler arm assembly, (13W501)
3. Disassemble the idler arm assembly.
Ball Joint Dust Cover
Remove the dust cover and O-ring from the ball joint.
Проверка
1. Check idler arm support for damage or deformation.
2. Check idler arm, for damage or deformation.
3. Check idler arm bushings for wear or deterioration.
4. Check dust covers and O-rings for damage or deteriora-
tion.
5. Check tie rods for damage or deformation.
6. Check relay rod for bends or damage.
INSTALLATION
Ball Joint Dust Cover
1. Before installing the dust cover, apply the: ‘specified
multipurpose grease to the cover lip and the interior.
Recommeded multipurpose grease . . . . . , . . . . , . .
SAE J3 lOa, NLGI grade. #2EP
2.’ Apply packing sealant to the-tie rod mounting surface.
‘.
Оригинальная страница руководства
