1984-Montero · steering a · страница 19 из 33 · Открыть оригинал PDF ↗
3. Disconnect the pitman arm from the relay rod with the
special tool shown in the illustration.
4. Remove the gear box assembly.
5. Remove the pitman arm from,the gear box assembly with
the special tool shown in the illustration. (138729)
SEALS REPLACEMENT
Side Cover and Gear Box Housing
1. Place the mainshaft and cross-shaft in the straight-ahead
position.
2. Remove the breather plug, and drain off the steering gear
Oil.
3. Remove the side cover attaching bolts. (Y 1367 1)
4. Remove the lock nut of the adjusting bolt, and screw in
the adjusting bolt so that the side cover rises slightly.
5. Tap the bottom of the cross-shaft with a plastic hammer
to remove the cross-shaft and the side cover. (Y 13019)
6. Remove the side cover from the cross-shaft by turning
the adjusting bolt.
Caution
Do not lose the needle bearing rollers.
Оригинальная страница руководства
