1984-Montero · steering a · страница 30 из 33 · Открыть оригинал PDF ↗
9. Apply automatic transmission fluid to the vanes and
install the vanes on the rotor, paying close attention
to the installation direction. (C 132 17)
10. Install the pump cover. (13Y94 1)
11. Apply automatic transmission fluid to the ‘O-ring and
install O-ring to the suction connector.
12. Install the suction connector.
INSTALLATION
1. Mount the oil pump onto the oil pump bracket.
2. Install the drive belt, and adjust the deflection. (Refer to
p. 19-11.)
3. Connect the pressure hose. and return hose to the oil
pump. .
NOTE
Install the hoses so that they are not twisted armso that they
do not come in contact with any other parts.
4. Fill with automatic transmission fluid.
(Refer to p. 19-11;)
5. Bleed the system. (Refer to p. 19-l 1.)
6. Check the oil pump pressure. (Refer to p. 19-,12.)
7. Torque all parts to specifications during assemlbly.
Оригинальная страница руководства
