1989-Mitsu-Factory Manual · Рулевое управление с усилителем · страница 27 из 40 · Открыть оригинал PDF ↗
SERWCE POINTS OF REASSEMBLY
NIwJt!Ah
2. INSTALLATION OF U-PACKING/B. OIL SEAL
install the U-packing on the gear box, and press-fit the oil
seal by using special tools.
6. INSTALLATION OF OIL SEAL/7. BALL BEARING
(I) Press-fit the ball bearing and oil seal into the top cover
by using special tools.
(2) Apply multipurpose grease to the oil seal of the top
cover.
8. INSTALLATION OF THRUST NEEDLE BEARING
(1) Install the thinner thrust plate, thrust needle bearing
and thicker thrust plate to the top cover in that order as
shown in the illustration.
(2) Attach the top cover to the valve housing.
Caution
Be careful that the thrust plates and the thrust
needle bearing do not come off the top cover.
(3) Install the thinner thrust, plate, thrust needle bearing
and thicker thrust plate to the mainshaft in that order
as shown in the illustration.
Оригинальная страница руководства
