Pajero II Workshop Manual 1991 · Кузов · страница 6 из 52 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Service Adjustment Procedures

BACK DOOR ADJUSTMENT

E42FMAF

Adjust the fit of the door panel to the body by loosening
the striker mounting screws and moving thestriker.
Adjust the linking of the striker andthedoor latch by
increasing or decreasing the thickness of the striker shim:

DOOR WINDOW GLASSADJUSTMENTE42FEAN

Check that the door window glass runs smoothly in the door
glass channel when the glass isfullyraised and lowered. If it
does notadjust bythefollowing procedure.
Remove the door trim and waterproof film, (Refer to P.42-
25.B

Loosen thewindow regulator assembly mountingbolts
andmovetheuupper attachment back and forwardto
adjust the tilt of the glass

Loosenthereardoorcentre sash mounting bolt,and
adjustthe front-to-back position of the glass_

DOOR INSIDE HANDLE PLAY ADJUSTMENT

EAZFGAC

Remove the door trim and waterproof film: (Refer to P42-
25, 35.)

2Move the door inside handle installation position back and
forth to adjust so that the inside handle play allowance
with the standard value.
agress

Standard value:4-10mm (0.16-0.39 in:)

DOOR OUTSIDE HANDLE PLAY CHECK

E42FHAG
thedoor outside handle playdoesnot conformtothe
standard value, check the door outside handle or door latch
assembly, and replace if necessary.
Standard value: (A) 3-12mm (0.12-0.47 in )
(B) 2-8mm (0.08-0.31 in:)

PWJE9086

Оригинальная страница руководства