Pajero II Workshop Manual 1991 · Кузов · страница 34 из 52 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
<RH>
(1)After setting the rod to the LOCK position, apply battery
voltage to terminal @ and check if the rod moves to the
UNLOCK position when terminalisearthed.
(21After setting the rod to the UNLOCK position and applying
battery voltage to terminal @, check if the rod moves to the
LOCK ' positionwhenterminalis earthed.
DOOR LOCK KEY CYLINDER SWITCH
Operatetheswitchand check for continuitybetween the
terminals
NOTE
indicates that there is continuity between the terminals.
DOOR LOCK CONTROLUNIT
(1) Apply batterypowertoterminalsandandearth
terminalsand 6.
(2) Connectneedle-type circuit tester between terminal 0
and the earth, and after switching it to the DC V range, and
checktheneedlemovesattheinstantwhenthe
connection at terminalis removed.
(3) Next,connectthe needle-typecircuittesterbetween
terminal Oand the earth, and check if the needle moves at
the instant when the connection at terminalthat was
removed in (2) above is reconnected
(4) Also, check if there is a voltage of 12V between terminal
and theearth,andbetweenterminaland the earth;
NOTE
Thereason why the needle of the circuit tester moves in
(2) and (3)above is because battery voltage appears
between terminals @Dand Oand the earth for approximately
0.5 seconds_
Оригинальная страница руководства
