Pajero II Workshop Manual 1991 · Кузов · страница 48 из 52 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
SERVICE POINTS OF REMOVAL
REMOVALOFFRONTDRAINHOSE/5.REARDRAIN HOSE
Tie a rope to the end of the drain hose, wind a tape around
it until there is no unevenness, andpullthe drain hose into
the inside of thepassenger compartment_
REMOVAL OFMOTOR ASSEMBLY
(1) Fully close the canvas and remove the motor assem-
bly.
(21Make matingmarksonthe transmissiongearand
bracket of the motor assembly.
9.REMOVALOFFRONT GUIDE ASSEMBLY INSTALLA- TIONNUTAND SCREW
Removethehookoftheinner leather assemblyand
removethenuts and screwwhile rollinguptheinner
leather.
11, REMOVALOFLEATHERTOPASSEMBLY/12INNER LEATHER ASSEMBLY
After removing the E ring and lock band, remove the inner
leather assemblyfrom the leather top assembly.
Проверка
CHECKING THE SLIDING FORCE OF THE MOTOR CLUTCH
Inspecttheslidingforceoftheclutchbythe following
procedure
(1)Place thc hexagonal wrench from the special tools into the
hexagonal socketofthemotordriveshaft,andusC
springbalancetomcasurctheforccwhenthcmotor
clutchstarts t0 slip.
Standard value:45-55N (4.5-5.5 kg, 10-12 Ibs:)
Caution
The spring balance should be kept & right angle to
the wrench:
2If a wrench other than that in the special tools is
used, the value for the clutch sliding force will be
difterent, s0 only the special tool should be used.
Mitsublshi Motors CorporatlonFob. 1991
Оригинальная страница руководства
