COOLING SYSTEM · 6 — Pajero II 1991–1998 — руководство по ремонту

COOLING SYSTEM · 6

COOLING SYSTEM · 6

Pajero II Technical Information Manual 1991 · PYJE9002 PAJERO 91 TIM 1 · страница 6 из 71 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

COOLING SYSTEM

The cooling system is of thewater-cooled forced
circulationtypewith the following advantageous
features:

The temperaturecontrol typefanclutchhas
been adopted to reduce fan noises and engine
output loss

The rediator shroud is of the full-shroud type
which gives higher cooling performance
The automatic transmission oil cooler for vehi-
cleswithautomatictransmissionisofthe
'double cooling'type which means that both
the air cooling system and radiator built-in water
cooling system are integrated in the oil cooler.

Технические характеристики

Таблица в оригиналеТаблица: оригинал страницы 6
Распознанный текст таблицы — требует сверки с оригиналом
ItemsSpecifications
Cooling methodWater-cooled pressurized, forced circulation
Radiator
TypePressurized corrugated fin type
JIh (kcallh, BTUIh)
Performance
<8G72 ATT, 4G64,4654,4056>
<6672 MT>
193,396 x 10* (46,200, 183,3331
182,093 x 10' (43,500, 172,619)
<4D56 TIC>210,558x 10" (50,300, 199,603)
<4056 I/C
TIC>
221,861x 10' (53,000,210,3171
Radiator cap
High pressure valve opening pressure
kPa (kg/cm? , psi)
75-105 (0.75-1.05, 11-151
Vacuum valve opening pressure
kPa (kg/cm?, psi)
Automatic transmission oil cooler < Vehicles with AT>
Performance
JIh (kcallh, BTU/h)
<6G72>
<4654,4056>
55 (-0.05,-0.7) or less
6,195x 10* (1,480, 5,8731
4,814x 10* (1,150,4,563)
Thermostat typeWax pellet type with jiggle valve
Fan clutch type
Water pump type
Thermo type
Impeller of centrifugal type
NOTE

TIC: With turbocharger
VCTIC: With turbocharger and inter-cooler

CONSTRUCTION DIAGRAM

Иллюстрация 1, страница 6
Оригинальная страница руководства
Страница 6
100%

Назад
Сверху