1996 · REAR AXLE [27] · страница 2 из 22 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Общие сведения
OUTLINE OF CHANGES
The dust cover of the rear axle shaft and the ABS wheel-speed sensor rotor have been redesigned:
With this change, the service procedure for the axle shaft has been added;
Vehicles with 3500 petrol engine and 2800D Diesel engine has usedhybrid type LSDWith this
change, the service procedure has been added:
Технические характеристики
Общие технические характеристики
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Items | Standard wheelbase 2800D, 3500 | Long wheelbase 2800D |
|---|---|---|
| Differential | ||
| Differential size | No. 7.5 | No. 7.5 |
| Reduction gear type | Hypoid gear (fine pitch type) | Hypoid gear (fine pitch type) |
| Reduction ratio | 4.636 | 4.900 |
| LSD type | Hybrid type (Helical gear + VCU") | Hybrid type (Helical gear VCU") |
NOTE
Viscous Coupling Unit
Номинальные и предельные значения
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Items | Specifications |
|---|---|
| Standard value | |
| Press-fitting force of retainer Initial press-fitting force | 49,000 |
| Final press-fitting force | 98,000 _ 108,000 |
| Clearance of snap ring and retainer mm | 0-0,166 |
| Final drive gear backlash mm | 0.13-0.18 |
| Drive pinion turning torque | |
| Without oil seal Nm | |
| With anti-rust agent (new) | 0.6-0.9 |
| With gear oil applied (new or used) | 0.4-0.5 |
| With oil seal Nm | |
| With anti-rust agent (new) | 0.85-1.15 |
| With gear oil applied (new or used) | 0.65-0.75 |
| Limit | |
| Drive gear runout mm | 0.05 |
Оригинальная страница руководства
