1996 · REAR AXLE [27] · страница 10 из 22 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

BEARING OUTER RACE INSTALLATION

(1) Apply the multi-purpose grease to the external surface
of the bearing outer race.

(2) Press-fit the bearing outer race into the bearing case
byusingspecial tools.

OIL SEAL INSTALLATION

(1) Apply multi-purpose grease totheoutside of the oil
seal

(2) Use the special tools to press-fit the oil seal until it is
fiush with the end of the bearing case.

3) Apply multi-purpose grease to the lip oftheoil seal;

BEARING INNER RACE (INNER) INSTALLATION

(1) Pass the axle shaft through the bearing inner race, the
bearing case and the second bearing inner race in that
order.

(2) Use the special tool to press-fit the bearing inner race
to the axle shaft.

Caution

Bothbearing inner race sets should be press-fitted
together:

RETAINER PRESS-FITTING

Use the special tool to press-fit the retainer onto the axle
shaft,while checking that the press-fitting force is at the
standard value

If the initial press-fitting force is less that the standard
value, replace the axle shaft:

Standard value:

Таблица в оригинале

Распознанный текст таблицы — требует сверки с оригиналом

Initial press-fitting force	49,000 or more
Final press-fitting force	108,000 OoO _ 98,

Оригинальная страница руководства