MANUALS · SUPPLEMENTAL RESTRANT SYSTEM (SRS) [52B] · страница 14 из 48 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Connector lock system

Code No. 34

[Comment)

This diagnosis code is output if the double lock shorting bar of the SDU connector
is detectedt0 be open
However, if the vehicle condition returnsto normal forcontinuous period of 5
+ 0.2 secondsdiagnosis code No 34 will be automatically erased,andthe SRS
warninglamp will switch off.

Probable cause

Malfunction of connectors
Malfunction of SDU

Turn the ignitionkeyto theLOCKposition, disconnect
the negative battery cable and tape the terminal.
Caution

Wait at least 60 seconds after disconnecting the bat-
terycable before doing any further work:
(Refer to P52B-4.)

Remove the floor console assembly: (Refer to GROUP
52AFloor Console

Place a flat-tipped (~) screwdriver against the lock spring
(metal portion) of the SDU connector lock lever; and push
the spring horizontally toward the inside of the unit

Caution

Do not use excessive force to raise the lock lever
(green)

2Do not insert the screwdriver into the gap between
the lock lever (green) and the lock spring (metal
portion)

Disconnect the red14-pin connector from the SDU.

Is the SDU engagement detection mechanism operating
correctly?

Yes

No.

Insert the connector securely
and lower the lock lever
lock the connector

Replace the SDU

Оригинальная страница руководства