MANUALS · SUPPLEMENTAL RESTRANT SYSTEM (SRS) [52B] · страница 27 из 48 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Check connector for damage, terminals deformities, and
harness for binds
Check air bag inflator case for dents, cracks or deformities:
5Check harness (built into steering wheel) and connectors
for damage, and terminals for deformities
6.Check clock spring connectors and protective tube for
damage, and terminals for deformities_
Visually check the clock spring case and the gears for
damage_
8Align the mating mark andNEUTRAL"position indicator
and, after turning the vehicle's front wheels to straighta-
head position, install the clock spring to the column switch.
Caution
If theclock spring'smatingmark isnot properly
aligned, the steering wheel may not be completely
rotational during a turn, or the flat cable within the
clock spring may be severed, obstructing normal op-
erationof the SRS and possibly leading to serious
injury to the vehicle's driver
9.Install the steering column covers, steering wheel and
the air bag module_
10.Check steering wheel for noise, binds of difficult operation
11. Check steering wheel for excessive free play:
REPLACE ANY VISUALLY INSPECTED PART IF IT FAILS
THAT INSPECTION:
(Refer to P.52B-38.)
Caution
The SRS may not activate if any of the above compo-
nents is not installed properly, which could result in
serious injury or death to the vehicle's driver:
Оригинальная страница руководства
