1989-Montero · brakes · страница 5 из 38 · Открыть оригинал PDF ↗
Специальный инструмент
| Tool | Number | Name | Use |
|---|---|---|---|
| MB990620-01 | Piston cap instal- ler | Installation of rear wheel cylinder piston cap |


Диагностика и устранение неисправностей
| Symptom | Probable cause | Remedy |
|---|---|---|
| Vehicle pulls to one side when brakes are | Grease or oil on pad or lining surface | Replace |
| applied | Inadequate contact of pad or lining | Correct |
| Auto adjuster malfunction | Adjust | |
| Drum eccentricity or uneven wear | Repair or replace as necessary | |
| Improper braking ower | Low or deteriorated brake fluid | Replenish or change |
| p | Air in brake system | Bleed air |
| Overheated brake rotor due to dragging of pad or lining | Correct | |
| Grease or oil on pad surface | Replace | |
| Inadequate contact of pad or lining | Correct | |
| Brake booster malfunction | Replace | |
| Auto adjuster malfunction | Adjust | |
| Clogged brake line | Correct | |
| Proportioning valve malfunction | Replace | |
| Increased pedal trk | Air in brake system | Bleed air |
| soe (Reduced pedal to fill l | Worn lining or pad | Replace |
| rewa cearance) | Broken vacuum hose | Replace |
| Brake fluid leaks | Correct | |
| Auto adjuster malfunction | Adjust | |
| Excessive push rod to master cylinder clearance | Adjust | |
| Faulty master cylinder | Replace |



