1989-Montero · brakes · страница 10 из 38 · Открыть оригинал PDF ↗
BRAKE FLUID LEVEL SENSOR CHECK mwma,
1. Connect an ohmmeter to the connector of the brake fluid
level sensor.
2. Move the float from top to bottom and check for continui-
ty. The brake fluid level sensor is in good condition if there
is no continuity when the float surface is above “A”, and if
there is continuity when the float surface is below “A”.

PARKING BRAKE SWITCH CHECK
NOYDAPI
1. Remove the floor console.
2. Disconnect the parking brake switch connector, and then
connect an ohmmeter between parking brake switch
terminal and the mounting bolt.
3. If there is continuity when the parking brake is pulled, and
there is no continuity when it is released, the parking brake
switch is good condition.
-
BRAKE BOOSTER OPERATING TEST No5FcAo TEST WITHOUT A TESTER


1
