1989-Montero · brakes · страница 18 из 38 · Открыть оригинал PDF ↗
SERVICE POINTS OF REMOVAL
3. REMOVAL OF COMBINATION METER ASSEMBLY
Refer to GROUP 8 -Meter and Gauges.
NOSGBAB
Проверка
NOSGUD
e Check the bushing for wear.
a Check the brake pedal for bend or twisting.
o Check the brake pedal return spring for damage.
CHECKING STOP LIGHT SWITCH
Connect an ohmmeter to the connector of the stop light
switch, and then check for continuity when the plunger of the
stop light switch is pressed in and when it is released
outward.
The stop light switch is in good condition if there is no
continuity when the plunger is pressed in, and if there is
continuity when the plunger is released outward.
9. INSTALLATlON OF RETURN SPRING OF CLUTCH PE-
DAL/8. RETURN SPRING
Install the return spring to the position as shown in the
figure.
Оригинальная страница руководства
