BASIC IDLE SPEED ADJUSTMENT · 24 — Pajero II 1991–1998 — руководство по ремонту

BASIC IDLE SPEED ADJUSTMENT · 24

BASIC IDLE SPEED ADJUSTMENT · 24

Pajero II Workshop Manual 1998 Supplement · FUEL · страница 24 из 104 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

13-24 FUEL SYSTEM <6G72-SOHC 24 Valve Engine, 6GZ4-SOHC 24 Valve Engine> -

Иллюстрация 1, страница 24

6_If not within the standard value range, turn the speed
adjusting screw (SAS) to make the necessary adjustment:
NOTE

If the idling speed is higher than the standard value range
even when the SAS is fully closed, check whether or not
there isindication that the fixed SAS has been moved.
any
If there is an indication that it has been moved, adjust the
fixed SAS.

Press theMUT-II clear key; and releasetheISC servo
from the Actuator test mode
NOTE

Unless the ISC servo is released, the Actuator test mode
will continue 27 minutes

8_Switch OFF the ignition switch

9_Disconnect the MUT-II

10. Start the engine again and let it run at idle speed for about
10 minutes; check thattheidlingcondition is normal:

Оригинальная страница руководства
Страница 24
100%

Назад
Сверху