Pajero II Workshop Manual 1991 · Общие сведения · страница 50 из 52 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
STANDARD PARTS-TIGHTENING-TORQUE TABLE
EOIMA
Each torque value in the table isa standard value
The values in the table are not applicable
If toothed washersare inserted.
for tightening under the following conditions
(1) Bolts_nuts and washers are all made of steel
and plated with zinc.
(2)plastic parts are fastened.
(3)boltsare tightenedtoplasticordie-cast
insertednuts
(2)The threads and bearing surface of bolts and
nuts are all in dry condition.
(4) If self-tapping screws or self-lockingnuts are
used.
Standard bolt and nut tightening torque
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Bolt nominal | Torque Nm (kgm, ft Ib | s | ||
|---|---|---|---|---|
| dit | Pitch (mm) | |||
| ameer (mm) | Head mark | Head mark | Head mark | |
| M5 | 0,8 | 2.5 (0.25, 1.8) | 5 (0.5, 3.6) | 6 (0.6, 4.3) |
| M6 | 1.0 | 5 (0.5, 3.61 | 9 (0.9, 6.5) | 10 (1.0, 7.21 |
| M8 | 1.25 | 12 (1.2, 8.7) | 22 (2.2, 161 | 25 (2.5, 18) |
| M1o | 1.25 | 24 (2.4, 17) | 45 (4.5, 331 | 53 (5.3, 38) |
| M12 | 25 | 42 (4.2, 30) | 83 (8.3, 60) | 71) 98 (9.8, |
| M14 | 1.5 | 73 (7.3, 53) | 140 (14.0, 101) | 160 (16.0, 116) |
| M16 | 1,5 | 113 (11.3, 82) | 210 (21.0, 152) | 240 (24.0, 174) |
| M18 | 1.5 | 170 (17.0, 123) | 310 (31.0, 2241 | 350 (35.0, 253) |
| M2O | 1.5 | 230 (23.0, 166) | 420 (42.0, 304) | 490 (49.0, 354) |
| M22 | 1.5 | 310 (31.0, 224) | 570 (57.0, 412) | 660 (66.0, 477) |
| M24 | 1.5 | 400 (40.0, 2891 | 750 (75.0, 542) | 870 (87.0, 629) |
Flange bolt and nut tightening torque
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Bolt nominal | Pith | Torque Nm (kgm, ft.lb | s ) | |
|---|---|---|---|---|
| diameter (mm) | c (mm) | Head mark | Head mark | Head mark |
| M6 | 1.0 | 5 (0.5, 3.6) | 10 (1.0, 7.21 | 12 (1.2, 8.71 |
| M8 | 1.25 | 13 (1,3, 9.4) | 24 (2.4 17) | 28 (2.8, 20) |
| M1o | 1.25 | 26 (2.6, 191 | 50 (5.0, 361 | 58 (5.8, 42) |
| M1o | 1,5 | 24 (2.4, 171 | 45 (4.5, 33) | 55 (5.5, 40) |
| M12 | 1.25 | 47 (4.7, 341 | 95 (9.5, 69) | 105 (10.5, 76) |
| M12 | 1.75 | 43 (4.3, 31) | 83 (8.3, 601 | 98 (9.8, 71) |
Оригинальная страница руководства
