MANUALS · AUTOMATIC TRANSMISSION [23] · страница 56 из 128 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Распознанный текст таблицы — требует сверки с оригиналом
| Procedure | Conditions | Operation | Judgement value | Inspection item | Inspection procedure page |
|---|---|---|---|---|---|
| Selector lever position: Mode | Engine (1) Driving at constant speed of 50 km /h | Data List No. 27 (1) 4 | Shift control solenoid valve No. | Code Nos 41, 42 Shift control solenoid system valve No (P.23-35-14) | |
| selection: Normal Overdrive: ON | (20 seconds or more) | Shift control solenoid valve No. 2 | Code Nos. 43, 44 Shift control solenoid valve No. system 5 (P.23-35-1 | ||
| Data List No. 41 (1) OFF | Shift control solenoid valve No. | Code Nos. 41, 42 - Shift control solenoid valve No system (P23-35-14) | |||
| Data List No. 43 (1) OFF | Shift control solenoid valve No | Code Nos. 43, 44 Shift control solenoid valve No. system 5, (P.23-35-1 | |||
| Selector lever position; Mode selection: Normal | Monitor MUT-II data list Nos 11,27 ad 32 (1) TPS Accelerate t0 4 | (1) (2) and (3) should match the specified output shaft speed (vehicle speed) , and there should be no abnormal | Malfunction when shifting | Upshifting does not occur (P23-35-20) Downshifting does notl occur (P23-35-21) | |
| Overdrive: ON | range at opening angle of 30%. (21) Slowly decelerate to a standstill: | shocks: For (4), (5) and (61. downshifting should occur immediately after | Shifting point abnormality (P.23-35-22) | ||
| (3) TPS Accelerate to 4 range at opening angle of 50% | moving the lever. | Upshifting occurs spontaneously (P.23-35-22) | |||
| (4) At 50 km/h in 4 range; turn overdrive OFF. | Incorrect drive gear position (P.23-35-23) | ||||
| Carry out the same | (5) At 50 km/h in 3 range, move | Malfunction while driving | Large shocks (P.23-35-24) | ||
| test with the mode selection at | selector lever to 2 range. (6) At 20 km/h in 2 | Slippage (vibration) (P23-35-25) | |||
| POWER and HOLD also. | range. move selector lever to L range: | Lockup malfunction (P23-35-26) | |||
| Poor engine braking (P23-35-26) |

