MANUALS · AUTOMATIC TRANSMISSION [23] · страница 111 из 128 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
SERVICE POINTS OF REMOVAL
E231BAE
11. REMOVAL OF TRANSFER CONTROL LEVER ASSEMBLY
When removingthetransfercontrolTever assembly,
move the transfer control lever to the 2H (2 wheel drive-
high range) position
Проверка
EZZICAJ
Check the transmission control cable assembly for func
tion and for damage.
SERVICE POINTS OF INSTALLATIONE23IDAK 11. INSTALLATIONOF TRANSFERCONTROL LEVERAS- SEMBLY
(1)Remove the adhesive sticking to the transfer control
lever assembly mounting bolts_
(2)Usea tap (M8 x1,.25) to remove the adhesive stick-
ing to the transfer control lever assembly installation
holes
(3) Check tobe sure that the return springis set to the spring
stopper of the 2-4WD shift lug, and then install the con-
trol lever in the position shown by the arrow
(4) Apply specified adhesive to the threads of the lever as-
sembly mounting bolts, and then tighten the transfer
control lever:
Specified adhesive: 3M Stud Locking No. 4710 or equivalent
INSTALLATION OF TRANSMISSION CONTROL CABLE ASSEMBLY (SELECTOR LEVER ASSEMBLY SIDE)
After installing the transmission control cable, adjust it by
the following procedure
Movethe selector lever to the"N=position.
(2) Loosen the adjusting nut, gentlypullthe end of the
transmissioncontrolcableinthedirectionofthe
arrow and then tighten the adjusting nut:
Оригинальная страница руководства
