MANUALS · AUTOMATIC TRANSMISSION [23] · страница 127 из 128 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

31. INSTALLATION OFTRANSMISSIONAND TRANSFER ASSEMBLY

(1) Alignthe engine transmission mountingbolt holes with
the transmission and transfer assembly as shown in the
illustration, and connect the transmission and transfer as-
sembly to the engine_

6.INSTALLATION OF TRANSMISSION CONTROL CABLE ASSEMBLY

After installing the transmission control cable, adjust it by
the following procedure_

(1) Move the selector lever to the "N" position.

Loosen the adjusting nut;gently pull the end of the
transmissioncontrolcableinthedirectionofthe
arrowandthentightenthe adjustingnuttothe
specified torque.

INSTALLATION OF THROTTLE CONTROL CABLE

After installing the throttle control cable, adjust it by the
following procedure_

<Diesel powered vehicles>

(1)Removethecable fromthebootoutercableside
until the inner cable stopper can be seen:
(2) Openthethrottlelever completelyandadjustthe
cable with the adjusting nut so that the distance be-
tweentheinner cablestopperandtheoutercable
end is at the standard value

Standard value (A}:34-35 mm (1.34-1.38 in )

<Petrol powered vehicles>

Open the throttle lever completely ad adjust the cable
with the adjusting nut So that the distance between the
inner cable stopperandthedust coverendisatthe
standard value.

Standard value (B}:0-1 mm (0-0.04 in.)

Оригинальная страница руководства