MANUALS · AUTOMATIC TRANSMISSION [23] · страница 107 из 128 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
AUTOMATICTRANSMISSIONFLUIDTEMPERATURE SWITCH CHECK
Removetheautomatictransmissionfluidtemperature
switch from the automatic transmission.
Caution
Use care to preventforeign subjectfrom enteringthe au-
tomatic transmission fluid temperature switch mount-
inghole:
2Immersetheautomatictransmissionfluidtemperature
switch in fluid up to the threaded portion as shown in the il
lustration_
3Use a circuit tester or the like to check continuity when oil
temperature changes
The switch is judged good if the conditions are in the follow-
ing ranges
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Item | Temperature (PF) |
|---|---|
| Continuity is present (temperature at point A) | 143-151 (289-304) |
| No continuity is present (temperature at point B) | 125 (257) or less |
Apply recommended sealant sparingly to the thread of auto-
matic transmission fluid temperature switch.
(Models not equipped with O-ring in the sensor mounting
hole)
Specified sealant: 3M ATD Part No. 8660 or equivalent
5Install the automatic transmission fluid temperature switch.
Tightening torque: 30 Nm (3.0 kgm, 22 ft.Ibs )
6,Check automatic transmission fluid for quantity:
Оригинальная страница руководства
