MANUALS · AUTOMATIC TRANSMISSION [23] · страница 105 из 128 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Проверка работы селектора

E23FOAB

Shift selector lever to each range andcheck that lever
moves smoothly and is controled:Check that positionin-
dicator is correct

2Checktobe suretheselector lever can be shiftedto
each position(bybutton operationasshownin the
lustration)
3Start the engine ad check if the vehicle moves forward
whentheselectorleverisshifted fromtoD,and
moves backward when shifted to R.

Whentheshift levermalfunctions, adjust control cable
and selector lever sleeve. Check for worn shift lever as-
sembly sliding parts:

ADJUSTMENTOFINHIBITORSWITCHAND CONTROL CABLEE23FOAH

INHIBITOR SWITCH

(1)Move the selector lever to the"NSposition.
(2)Loosen the adjusting nut of the control cable_

3) Loosen the inhibitor switch mounting bolt;
Adjust by turning the inhibitor switch so that the bosses
for aligning theNposition on the inhibitor switch are
aligned with theNposition adjustment lever_
(5} Tightentheinhibitorswitchmountingbolttothe
specified torque.

(6) Gentlypullthe end of the transmission control cable in
the direction of the arrow and tighten the adjusting nut
to the specified torque.

Check that the selector lever is in the "N"position.

(8) Check that each range on the transmission side operates
and functions correctly for each position of the selector
lever

Mitsubishi Motors CorporationFeb_1991

Оригинальная страница руководства